Description
Two-component clear polyurethane sealer for interiors, wooden floors, and exterior wooden products.
Application area
- Interior finishing
- Wooden floors
- Exterior-use products
- Uncoated solid wood or veneer
Series: Code: IS207
IS207 two-component clear polyurethane sealer
Two-component clear polyurethane sealer
Clear polyurethane sealer with penetration, extractive blocking, and elasticity. Can be used in polyurethane cycles for parquet and exterior window frames.
Package
1 l5 l25 l
PriceRequest wholesale price
AvailabilityCheck with manager
Ready solutions
01
Exterior wood coatings tested at low temperatures
Task: Selection of exterior cycles for pine and larch tested at low temperatures, with different application methods and durability up to 8-10 years according to source data.
02Fire-resistant coatings for wood
Task: Fire-resistant finishing systems for wood surfaces under different standards: Italian, British, European flooring and shipbuilding requirements.
03ARBOREA PROTECH: chemically resistant exterior lacquers
Task: Water-based exterior lacquers for windows, doors and wood products with high weather, UV and grease, cream and sweat resistance in high-touch areas.
04SA11: sealant for windows and doors
Task: One-component water-reducible acrylic sealant for wood doors and windows, joints and end-grain areas.
Technical characteristics
- Appearance
- Colourless liquid
- Solids content
- 25.0 +/- 2 %
- Hardener
- C207, 100%
- Pot life
- 3 h
- Thinner
- D1010 or D1015, 10-30%
- Consumption per coat
- 100 g/m2
- Maximum consumption
- 130 g/m2
- Number of coats
- Up to 2
- Touch dry
- 1 h
- Ford Cup 2 viscosity
- 34.0 +/- 5.0 seconds
- Density
- 0.95 +/- 0.05 g/ml
- Shelf life
- 730 days
Application method
Substrate preparation
Sand with P150, then P180, and remove dust thoroughly with compressed air.
Mixing
Ready to use; thin with D1010 or D1015 by 10-30% if needed.
Application
Apply by brush, manual roller, or 1.8-2 mm nozzle spray at 3 atm.
Surface preparation
- Overcoat after 6-8 hours at 25°C.
- Do not use as a sealer before polyester materials.
- Store at 5-35°C.
Benefits
Polyurethane resistance
Suitable for coatings where mechanical resistance and a stable appearance matter.
2K strength
Two-component chemistry improves coating reliability in use.
Stable result
Helps repeat finishing quality from batch to batch.
Clear appearance
Preserves the substrate appearance for systems where material texture matters.
Need help selecting a system?
Our technologists will help select the right system for your task, material, and operating conditions.